null

Clutch Masters 11-14 Ford Mustang 5.0L 11" 23 Spline FX400 Clutch Kit - 6-Puck

$799.00
$719.10
(You save $79.90 )
Weight:
27.00 LBS
Shipping:
Calculated at Checkout

Description

Part Number: 07051-HRC6-H
Notes: FX400 Clutch Kit; High Rev Pressure Plate; 6-Puck Ceramic Spring Disc; Hydraulic Slave Cylinder Included
Manufacturer: Clutch Masters 
Product Category: Clutches
 
STARTYEAR ENDYEAR MAKE MODEL SUBMODEL CYL LIT FUEL FUELDEL ASP ENGDESG NOTES
2011 2014 FORD MUSTANG ALL V8 5.0 ALL ALL ALL ALL 11in Clutch; 23 Spline

 

Clutch Masters FX400 Clutch Kit: Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing.

The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. 
SFI Approved for most race applications.
*Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop.


*Features*
* Ultra heavy-duty street &racing system
* Holding capacity 170% over stock
* Heavy-Duty reinforced pressure plate
* Hi-Leverage pressure ring design
* Sprung hub/4-button
* Ceramic friction material
* SFI Approved on most race applications. 

*Includes*
* Pressure Plate
* Clutch Disc
* Throw-out Bearing (when applicable)
* Pilot Bearing or Bushing (when applicable)
* Alignment Tool 

 

Today, thanks to Clutch Masters, increased holding pressure does not necessarily mean increased pedal pressure and the problems that can accompany it. By re-engineering the leverage or fulcrum point on the pressure plate through their Hi-Leverage technique, Clutch Masters has increased clamping power, often without changing pedal pressure.

Excessively increased pedal pressure, as found in many of today's traditional high performance clutches, places an unsafe amount of pressure on the delicate crankshaft thrust bearing found in most of today's sport compact automobiles. Placing undue stress on the thrust bearing typically causes the bearing to wear prematurely or fail altogether. This failure can lead to catastrophic internal engine damage.

A clutch, simply put, is a friction device that disengages and engages the engine from the transmission to allow for transition from motionless to movement and for gear changes. For street applications a smooth transition of power is essential while still being able to transfer all the power of the engine to the transmission. As power output of engines increase and demands on clutches become greater - for example high performance street or racing cars - the holding and clamping capacity of a clutch also must increase. This is where Clutch Masters' innovative engineering comes into play.